Go to Main Content

Lakeland Community College

 

HELP | EXIT

Detailed Course Information

 

Fall 2019
Oct 22, 2019
Transparent Image
Information Select the desired Level or Schedule Type to find available classes for the course.

WELD 1330 - Basic GTAW (TIG) Welding
Prerequisite: WELD 1030 (can be taken concurrently). This course introduces students to the basic concepts involved in using the Gas Tungsten Arc Welding (GTAW) or (TIG) process to produce cost effective fillet and groove welds in the flat and horizontal positions. Welds are made in carbon steel, stainless steel, and aluminum. Familiarization with the equipment, set up, materials, and the manipulation technique are emphasized. Students must furnish: long pants; welding helmet (shade #10 or above); safety glasses; work gloves; welding jacket; leather work boots, preferable steel toe; 8” crescent wrench; soapstone and holder; tape measure; combination square; chipping hammer; wire brush; center punch; 12 oz. ball peen hammer; and tool bag. 4 1/2” grinder is optional.
0.000 TO 3.000 Credit hours
1.000 Lecture hours
4.000 Lab hours

Levels: Credit
Schedule Types: Lab, Independent Study, Lecture
All Sections for this Course

Computer/Design/Engineer Tech Division
Welding Technology Department

Restrictions:
Must be enrolled in one of the following Levels:     
      Credit

Prerequisites:
Credit level WELD 1030 Minimum Grade of D

Return to Previous New Search
Transparent Image
Skip to top of page
Release: 8.7.2.4